Being informed on how the process should be handled will give proper insight to prevent the locksmith from making a mistake, or the client from getting inferior or unnecessary service.

google_ad_height = 90; It should only be used when there is no other method available to open the locked door. Long may we prosper. 18. If no attempt has been made to pick the lock, now would be the time.

At no point should the lock be drilled if there is a way of entry that excludes harming the property of the client. All other options have been exhausted and at this time the only remaining alternative is to have the locksmith drill the lock.

Copyright © 2020 United Locksmith. You can then use pliers to turn the latching mechanism and open the coin door. to pop the latch off the cylinder. I went to Canadian Tire and bought a set of DeWalt titanium drill bits with a PILOT TIP and a NO SLIP SHAFT.

Find Out Here.

If the above fails try to thread a 2 inch long 1/4 inch self threading the lock will open by inserting a screwdriver and turning it. That's ok, I still appreciate the feedback. How to drill out a Barrel lock "Center punch the 3/8 inch round part in the center of the cylinder.

"Center punch the 3/8 inch round part in the center of the cylinder. If the lock did not open for

Donate to Pinside.